Skip to main content

Licensed NH Electricians · 10 Years Experience · Franklin, NH

Copp Electric logo

Generac Installation

Generac Generator Installation & Dealer in Franklin, NH

Copp Electric is an authorized Generac dealer and factory-trained installer serving Franklin and the Lakes Region. We size the Generac unit to your real load, set the pad, wire the automatic transfer switch, coordinate propane or natural gas, pull the permit, and commission the system so power restores automatically within seconds of an outage.

Call 603-707-4293Request a quote
Generac standby generator on a pad beside a stained-cedar lakeside home

What’s included

  • Authorized Generac dealer pricing and factory warranty registration
  • Load calculation and Generac model sizing for your real usage
  • Generac Guardian, Celera, or PowerPACT selection guidance
  • Concrete or composite pad set and leveled
  • Automatic transfer switch installation and panel integration
  • Coordination with your propane or natural gas supplier
  • Permit filing and inspection scheduling
  • Full commissioning, live load test, and homeowner walkthrough
  • Optional $350 annual Generac service plan to keep the warranty valid

Signs you need this

  • You want a Generac standby generator installed by a dealer, not a box-store handoff
  • You are on a well and no power means no water
  • You heat with a boiler or furnace that needs electricity to run
  • You work from home and cannot lose connectivity
  • You have a sump pump, medical equipment, or a full freezer to protect
  • You want the Generac factory warranty registered and supported locally

How the job runs

  1. 1

    Site visit

    We walk the property, review your panel, and calculate the load you actually need to carry, then recommend the right Generac model.

  2. 2

    Written proposal

    You get a fixed scope covering the Generac unit, transfer switch, pad, permits, and gas coordination at dealer pricing.

  3. 3

    Install day

    Pad set, Generac unit placed, transfer switch wired, fuel line coordinated with your supplier.

  4. 4

    Inspection & commissioning

    We pull the permit, meet the inspector, run a live load test, register the factory warranty, and show you how it works.

What it costs

Most Generac whole-house standby generator projects in this area run in the mid-four to low-five figures installed, driven mainly by unit size, transfer switch type, and distance from the panel and gas line. As a Generac dealer we give you dealer pricing and a fixed written number before anything is ordered.

Generac Installation questions

Why buy a Generac generator from a dealer instead of online or a box store?
A dealer registers your factory warranty, sizes the unit to your actual load rather than a guess, coordinates the gas and permit, and commissions the system with a live load test. A box-store unit dropped off without that setup is often undersized, unpermitted, and unsupported when it fails to start.
Are you an authorized Generac dealer?
Yes. Copp Electric is a Generac dealer with factory-trained technicians who install and service Generac standby generators across Franklin and the Lakes Region, and we register your warranty with Generac at commissioning.
Which Generac generator do I need for my house?
For whole-house coverage on a typical New Hampshire home with a well, heat, and kitchen, 18 to 26 kW from the Generac Guardian line is common. Essential-circuit coverage can be done smaller with a PowerPACT unit. We size it from your actual panel and loads, not a rule of thumb.
Does a Generac generator run on propane?
Yes. Most homes in the Franklin area run Generac standby generators on propane, and many units can be configured for natural gas where it is available. We coordinate the hookup with your fuel supplier.
Do you service Generac generators you did not install?
Yes. Our factory-trained technicians service and repair Generac air-cooled standby generators regardless of who installed them, with a $350 annual service that includes an 18-point inspection report.

Get a quote for this

Send the details and we will follow up.

So we can send you a copy of your quote request.

We reply to every request. For urgent electrical problems, call instead.

Available across the Lakes Region

Further reading

Other services

Need an electrician who shows up and does it right?

Call any time for a straight answer, or send the details and we will follow up with a written quote.

Franklin, New Hampshire · Open 24 hours, 7 days a week

Call 603-707-4293Request a quote